This is my wife's car. Kia Sorento (2011) This is the passage side headlight problem. I have rewired this before. I used these blue clips. That just snap over the old wire and new. I went on YouTube to find out why I could not pull the headlight out. They showed me that there is one more bolt under the headlight inside that needs to be unscrewed. you need to take the two top blots out that hold the headlight in place. Plus, the two bolts and (4) plastic screws that hold the grill in place. Then that bolt under the headlight inside the engine compartment. Then just pull it out straight.
This is where I put the new light connection in. I had to cut the old connection out and replace it with these.
You can see the green corrosion. That is where I used those blue clips. Had to cut them out and start all over again.
As I wanted to change out both headlights. I had to take this one out too. The wire is way too short. I was going to replace it,but said next time.
These are the new bulbs I put it.
This is the old style bulb. I will keep both of them, just in case I need to replace them, later on.
Okay I will do another project. These lenses are very dull. and hard to see during the nighttime.
as I am getting a little older each day, I have problem driving at night. The headlights that are coming towards us are very bright and sometime hard to see the road. That is why I put the better bulbs and now try to clean the lenses up. I saw this on You Tube. The guy used 3M protect rubbing compound. It cost $18.+. at Advance Auto. I went to Walmart trying to find it there. They don't carry 3M rubbing compound. So, I saw Turtle Wax Rubbing Compound and got that for $6.+ I am thinking, I used this before, many years ago and it worked then. Why not now?
I used it and let it set for a little while, after it dried. I got out the Ryobi bluffing wheel tool. For polishing our vehicles and boat even.
See how dull my little girl's headlight are?
Did the same thing just rubbed it on and then buffed it off.
I did the same on my baby's big girl truck. 2004 F150. Looks much better don't you agree???
After doing all that, I got the hose out and washed her car and my little truck. Just to make them look even more happy.
Jeanne and I went to church this last Sunday and Pastor Craig had a panel on the stage. It was Pastor Jay, Pastor Craig, Dylan and Brain. These four guys all work together at the Crossing Community Church. It's on Indrio Road, in Lakewood Park area. Well, the panel was talking about sitting at the table of our lives. You know when you sit down with your family, Are, you always wanting to sit with other Christians? Or maybe not? They were trying to tell us, who did Jesus sat with? Sometimes Christians. but most of the time, with Ordinary People. SINNERS. I know myself; I use to go out with others. I will use an example. Every morning, I get up I put on Pandora, Christian Music. A couple of days ago, my wife asked if I knew Toby Keith. he passed away last week. So, we have been listening to his music. Now there is nothing wrong with it. But it doesn't always talk about our faith. But it does bring back some old stuff, I remember.
Okay back to who sits at our table? Sometimes others. We as Christians, we need to invite those that don't know Jesus. Just a side note, don't try to preach to them. That doesn't always help. We all need to just listen and just become their friend.
My prayer is, that I as a Christian I just listen and ask the Holy Spirit to use me.
No comments:
Post a Comment